Print Profile(1)
Description
Download and 3D Print a Stunning Mars Landscape!
Step into the extraordinary landscape of Mars with this 3D model, captured by the HiRISE instrument aboard NASA’s Mars Reconnaissance Orbiter. Small Martian crater whose northern rim for some reason is flattened into a straight line. Such a crater is rare, since almost all craters rims are round, even in the case of a low angle impact. The cause is unknown, though there are theories.
Image source: NASA/JPL-Caltech/UArizona
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm
| Filaments Used | Color | Transmission Distance |
| PLA BambuLab Basic Black |  | 0.6 |
| PLA BambuLab Matte Ash Gray |  | 1.5 |
| PLA BambuLab Basic Jade White | 
| 5 |
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Ash Gray
At layer #14 (1.2mm) swap to Jade White for the rest.
Created with the tool HueForge
License
Comment & Rating (1)