Print Profile(3)
![[New v3] Pilot G2 Ink Version with Screw-on Top](https://makerworld.bblmw.com/makerworld/model/USb699d2f1065b90/846091137/instance/846f6ec3e91441c0.webp?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
![[New v2] Bic Ink Version](https://makerworld.bblmw.com/makerworld/model/USb699d2f1065b90/702501528/instance/decbd6df8e3262eb.webp?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Want more like this model? Check out these collections: Grenades | Artillery & Ammo | Life-size Weapons | Missiles & Bombs | and more (3)… |
Summary
This pen is a 1:1 full size replica of the iconic .50 cal round. The cap seamlessly hides the pen, so it looks like a bullet until the cap is removed.
All you have to do to assemble the pen is to remove the tip/ink from a pen, such as a Bic pen, and then insert it into the tip of the printed bullet pen.
Pen Ink Options
You've got 3 options for the ink:
Pilot G2 Print Profile
Bic Print Profile
Filaments used
- GiantArm Silk Gold (Amazon link)
- Sunlu Silk Red Copper (Amazon link)
Assembly takes seconds
Pilot G2 Version
Simply insert the Pilot G2 ink, then screw on the tip.
Bic Version
Simply remove the ink from the tip of a Bic pen, then insert it into the 3D printed pen.
If using the Pilot G2 version – is your ink missing the cap?
If your ink is missing the little black plug/cap at the bottom (see image below), then you may find the ink to be a tiny bit loose in the 3D printed pen. I have included a print profile on this model called “Optional Ink Cap for Pilot G2” that you can print and use if your ink cap is lost or missing. This way your ink will fit nice and snug in the 3D printed pen.
Boost Me (for free)
If you enjoy my work and would like to help support my ability to share more (and even better) models in the future, please consider boosting or buying me a coffee at the link below. Your support is what helps me have enough filament and supplies to do all the print testing required for my models to be high quality and easy to assemble. It takes a mountain of test prints for each model. Thanks :-)
| Here's a link to my Buy Me a Coffee page, thanks for the support! |
( ! ) Do not sell my prints — I have not authorized selling prints. If you sell my prints on Etsy, Amazon, eBay, etc, I will find out.
This 3D print is intended for decorative purposes only and is not suitable for children. Small parts may present a choking hazard and edges may be sharp. By printing this 3D print, you assume all liability for any harm to yourself or others resulting from its use.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (155)