watering rose
Print Profile(1)
Description
Watering Rose
This is a watering rose designed to attach to a standard watering can with a (conical) 24 to 26mm diameter spout.
The watering rose is printed flat, and to achieve the best water distribution, the front of the print needs to be softened in hot water for reshaping.
After immersing the print in hot (boiling) water for 15-30 seconds (for PETG), carefully inspect the print. By pushing from the center on the inside and rotating outward with a tool like the back of a screwdriver, you can shape the flat surface into a dome, ensuring a wide, even spread, like that of a traditional watering rose. If the print hardens before reaching the desired shape, repeat the process.
Disclaimer:
Exercise caution during the reshaping process. Water may leak through the holes during the hot water dip, and hot water can flow through the connection part of the print when turning it.
Boost Me (for free)
Want more models like this, help me out by clicking the BOOST button.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)