Print Profile(1)
Description
I designed this ON AIR LIGHT BOX because I want to indicate when I do not want to be disturbed.
I used black PLA for the box and red and white PLA for the letters and the border.
For the lighting, I used a small self-adhesive LED strip, a two-pole on/off switch, and a 4x AA battery holder.
https://de.aliexpress.com/item/1005006265498282.html
https://de.aliexpress.com/item/1005004608439621.html
https://www.amazon.de/gp/product/B07WJ3HFSP
Alternatively, an LED strip with a USB cable can also be used.
The following countersunk screws made of stainless steel are required,
4 pieces, M4x12
10 pieces M3x8
4 pieces nuts M4
I used the following magnets,
8 pieces, 8mm diameter, 3mm thick and 3mm hole
4 pieces, 20mm diameter, 5mm thick and 5mm hole
When purchasing the magnets, pay attention to the polarity.
One half south, the other half north, so that they do not repel each other after assembly.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)