Mazda Miata Door Pull (NA)
Print Profile(1)
Bill of Materials
- 7/8"washer x 2:
- 36"colorwebbing x 1:
Description
Mazda Miata Soor Pull (NA)
Porsche-style door pulls for your NA Miata This is a snap-style cap and base that does not require any hardware to hold the cap.
Additional Resources needed:
Adding your color webbing strip for color personalization, the shortest length suggested is 14" as you want enough material to create a loop of 6" and an additional 2" for 1" overlaps for the eye loop to create a little webbing sandwich. Use a 7/8" washer to help keep everything tight.
Use a hot knife or similar tool to create the holes needed in webbing. This will seal the webbing and prevent fraying.
2 ea 7/8" flat washers
36" of color webbing can be bought at most local craft stores
Print settings:
Use PETG or ABS or ASA or stronger material with better heat resistance.
Layer Height: 0.20mm base with variable layer height
Perimeters: 3
Infill: 15% Gyroid
Support: Required
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)