GAME BOY EDC Magnetic Pusher

GAME BOY EDC Magnetic Pusher:

• This is a magnetic pusher based on the GAME BOY COLOR, inspired by the click sound of inserting cartridges into the handheld. We hope you can enjoy the feeling of inserting a cartridge anytime, anywhere.
• The pusher is divided into three layers, with a limit set inside. The cartridge can be pushed out of the cartridge bay with the back and stay in place, with high playability and freedom.
• You will need 20 4x2mm round magnets (Maker's Supply CA001), one box of magnets can be used to assemble a set of pushers. Or purchase the same size magnets yourself.
• In the assembled state, the magnet poles should all be in the same direction. You can test and install them as you go. Or refer to the magnet pole direction in the assembly guide below.
• Due to tolerances, it is recommended to use glue to secure the magnets. Please keep magnets and glue away from children to prevent accidents.
• Maker World exclusive model, please do not reprint, modify or use for commercial purposes. Thank you for your support.

• Disc Description:

  Disc 1: Handheld body (with manual supports preset)

  Disc 2: Game Cartridge

  Disc 3: Monochrome LCD and buttons (size is a little tight, but it has been tested and can be pressed into the body without glue; START and SELECT are smaller parts and need to set Brim, cut them off at the root directly. If they are difficult to insert, you can cut a little bevel at the bottom)

  Disc 4: Multi-color LCD (pause layer switching materials, it is recommended to use gray for layers 1-18, and black for layer 19)

  Disc 5: Multi-color LCD (AMS multi-color printing)

————————————————

Update on 2024.10.31:

• GAME BOY Pocket Pusher
• The installation method is the same as that of GAME BOY COLOR, but the two magnets on the back have been removed due to the shape.

————————————————

Update on 2024.11.05:

• Pokemon & Zelda themed screens, Disc 1 is the pause switching material version (recommended colors green, black), Disc 2 is the AMS version.
• Due to precision reasons, the diagonal line effect in the cover image requires a 0.2mm nozzle or the whole thing needs to be enlarged by 120% or more to be visible; a 0.4mm nozzle will simplify the graphics, the effect is shown in Figure 2.

————————————————

Update Plan:

• Make different patterned replacement panels for the LCD.

  Updated Pokemon & Zelda themed screens on 2024.11.05

• To reproduce the real machine effect, we also plan to make handheld back stickers and cartridge stickers in the future, which will be uploaded to the assembly instructions in PDF format.

  The price of the sticker is quite high according to the inquiry on Taobao…… Forget it……

• Complete GAME BOY and GAME BOY Pocket shaped pushers.

  GAME BOY Pocket shaped pusher was updated on 2024.10.31

————————————————

Showcase of the Arsenal (Tip of the Iceberg):