Portable Laptop Stand for Travel

I am puzzled by the support issues some users are encountering—I regret to say the feedback received has been insufficiently detailed.

I suspect a flaw in their support interface configuration—either a dedicated support material is not being utilized, or PETG is not employed as a support interface for PLA. Without employing this printing technique, a support interface and Z distance set to 0 in my print configuration will render the supports irremovable.
You must adjust this setting—specifically, the support interface and Z distance.

I am unclear why some users are experiencing support difficulties; apologies, but the feedback provided has lacked detail.

I suspect an issue with their support interface configuration—either a dedicated support material is not in use, or the technique of using PLA with a PETG support material is not being applied. Without utilizing this printing technique, setting the support interface and Z distance to 0 in my print settings will result in supports that are impossible to remove.

This size is appropriate for my 13.6-inch MacBook Air and can be scaled to accommodate other sizes.

大小適用我的macbook air 13.6，或許可以放大或縮小適用其他不同尺寸。

This “Portable Laptop Stand for Travel” incorporates four magnetic arrays, effectively securing the components and preventing dispersal within a backpack. When required, a concealed horizontal bar can be inserted into designated slots for tool-free assembly.

這款「旅行用便攜筆電支架」其內部配置4組磁鐵陣列，能有效地將各個零件組合，避免在背包中散落。當需要使用時，使用者只需輕鬆取出隱藏在內部的橫桿，插入孔，即可迅速組裝完成，無需任何工具。

Printing Instructions: During printing, pause and insert 5x5x5mm magnets (optional; support for other magnet sizes will be added later). Utilize support material for the horizontal bar slots and employ a multi-material approach with PETG and PLA for superior support.

列印說明:使用暫停列印時放置5x5x5mm or 30x10x3mm磁鐵(如果你沒有可以不放，未來將加入其他尺寸的磁體版本)，橫桿插槽的支撐使用支撐材料，PETG與PLA的異材質。

The 4.7x4.7x4.7mm dimension reflects my existing magnet design.

While specified as 5 cubic centimeters, its actual volume is 4.7 cubic centimeters.

A corrected 5 cubic centimeter configuration file has been included.

The 30x10x3mm dimensions align with materials available from Maker's Supply; printer-specific adjustments may be necessary.

4.7x4.7x4.7mm的尺寸是依照我現有的磁鐵設計，他的規格是5立方實際卻是4.7立方。

我新增了正確的5立方的配置檔案。。

30x10x3mm的尺寸是依照Maker's Supply中的材料設計，依照列印機不同可能需要微調設定。

**The magnet apertures are designed with a tighter fit to prevent nozzle attraction and expulsion of the magnets.**

**磁鐵孔設計的較小，使磁鐵可以剛好卡住，不被噴頭吸引而掉出