Y-20, a large transport aircraft, taking off!

A miniature Kunpeng

The model shown was printed using 0.16mm layer height, so the surface layer texture is still quite visible. Using a lower layer height should be able to reduce this. The material used is Bambu Lab's ordinary PLA material. The uploaded file can be printed directly on the A1 mini.

Each component is located by locating pins, but glue assembly is still required. I use ergo modeling glue, and the effect is excellent!

This is my first time making an assembly model, and the tolerances are not well controlled, mainly the vertical tail and the engine bracket: if they do not fit tightly, they need to be sanded down. I hope all of you will be understanding.

The zbrush sculpting was not well done, resulting in a slightly uneven high-poly surface. The boolean operation also kept failing, but luckily it didn't affect printing. The model is not well-structured. I will have to learn from my mistakes in the future. I must pay more attention to the standards.

Give me some likes, share and collect this model! I will consider being more comprehensive in my next design!