Hueforge color match super mario - Free 3D Print Model

Search models, users, collections, and posts

Kheev_Fpv

Art>2D Art

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

4.8 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

Released

Description

Project: mario color match 2.0.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Sunlu Matte Green Transmission Distance: 3
PLA Smart Recycled Blue Transmission Distance: 2.2
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 5
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Smart Recycled Red Transmission Distance: 4.4
This print uses 6 unique filaments

Swap Instructions:
Start with Green
At layer #7 (0.64mm) swap to Blue
At layer #9 (0.8mm) swap to Black
At layer #11 (0.96mm) swap to White
At layer #18 (1.52mm) swap to Yellow
At layer #22 (1.84mm) swap to Red for the rest.