Fibonacci Spiral Tree Fidget Toy (Medium)

The Fibonacci sequence, also known as the golden ratio sequence, is found in nature. Many plants' flowers and leaves grow according to this sequence, allowing them to make full use of sunlight and air.

This model utilizes the Fibonacci sequence and the principle of inertia. It requires no glue, is easy to assemble, and is fun and stress-relieving.

Small spiral tree link: 传送门

Large spiral tree link: 传送门

Materials:

The materials used in the actual photos are Bambu PLA Matte Ivory White 11100 Click to buy

Feel free to leave a comment if you have any questions.

Assembly Instructions:
Following the diagram direction, based on the number markings, place the parts with the upright column facing down and align them with the grooves of the lower parts, and install them in sequence.

If the gap at the top is too small after assembly, affecting rotation, you can print a longer handle (a separate print configuration has been uploaded) and replace it, or remove the middle X.

Order:

3D Printing Precautions
In my experience, the following points should be noted for daily printing:
1. Clean the printing plate regularly! If possible, it is recommended to wipe the printing plate with a damp towel before each print to reduce the first layer from not sticking or peeling off.
2. Pay attention to filament drying, and replace the desiccant in the AMS promptly to reduce stringing.
3. Update the desktop slicing software and mobile app to the latest version, and update the printer firmware in time.
 

For more questions and precautions, please consult customer service, or you can also check theBambu Official Wiki:
Bambu Mobile App (Bambu Handy) Printing Tutorial Click to view
Filament and Accessories FAQ Guide Click to view
Bambu Desktop Slicing Software (Bambu Studio) Printing Tutorial Click to view