Fibonacci Spiral Tree Fidget Toy (Small)

The Fibonacci sequence, also known as the golden ratio sequence, is found in nature, where the growth of many plant flowers and leaves follows this sequence, allowing them to make full use of sunlight and air.

This model utilizes the Fibonacci sequence and the principle of inertia, requiring no glue and is simple to assemble, making it fun and stress-relieving.

Medium-sized spiral tree link: 传送门

Large-sized spiral tree link: 传送门

Filament:

The filament used in the actual pictures is Bambu PLA Matte Ivory White 11100 Click to purchase

Feel free to leave a comment if you have any questions.

Assembly Instructions:
Following the diagram's direction, according to the number markings, place the parts with the upright column facing downwards, align them with the groove of the part below, and install them in sequence.

If the gap at the top is too small after assembly, affecting rotation, you can print a taller grip (separate printing configuration has been uploaded) for replacement, or remove the middle X.

Order:

3D Printing Precautions
In my experience, the following points should be noted for daily printing:
1. Clean the build plate regularly! If possible, it's recommended to wipe the build plate with a damp towel before each print, reducing first-layer adhesion issues or detachment.
2. Pay attention to filament drying, and replace the desiccant in AMS promptly, reducing stringing.
3. Upgrade the desktop slicing software and mobile APP to the latest version, and update the printer firmware in a timely manner.

For more questions and considerations, you can consult customer service or check the Bambulab Official Wiki:
Bambu Handy (Bambu Mobile APP) printing tutorial Click to view
Filament and accessories FAQ guide Click to view
Bambu Studio (Bambu desktop slicing software) printing tutorial Click to view