Base Seed Pixel Tension Holder and Bracket

The video found here: https://youtu.be/kg_30uULP4o?si=qQeLVgbLRwaxfBJf

Shows a Seed Pixel Mini Tree created by SFL Designs. The link to those files can be found here:

https://sfl-designs.com/STL-File-8-Seed-Pixel-Topper-64-String-p632040285

In the video the guy does a great job but a lot of unnecessary zip ties and twist and turns on the seed pixels. I'm not the best at this 3d thing, just started 2 months ago but I have great ideas so I took their base tension hook and turned the top hole facing outwards which will avoid having to use 2 zip ties as shown in the video. I also created a base seed holder so the seed LED face frontwards and are perfectly aligned. Using STL Design you can put 12 rings in each section which is 7/8 of an inch of space between each on then use the seed base bracket and each run will be perfectly straight. I'll have more photos or the completed tree in the next 24 hours.

The seed base bracket was created by slicing STL design seed pocket at the top of their topper and then adding positive objects. I printed about 15 different layouts to find the perfect spot for the loops for the zip ties. All credit goes to SFL Designs.