Coin golf
Print Profile(2)
Description
It is a golf board game designed to be used with a coin (since you almost always have it and especially when on a trip/vacation).
Use a coin or a washer as the “ball” or 3D-print a coin.
(A real coin or a washer are recommended since it have more weight to it and will go over obstacles easier).
The game future:
- 100% 3D-printed (no screw etc needed).
- Fully customizable where the game can easily be changed to have different difficulties.
- Obstacles can be mounted in series with different combinations.
- You can make your own obstacle.
- Portable
Feel free to upload your own obstacles as print profiles.
Note:
It is important that the build plate is clean before printing to avoid warping when printing the larger prints. So watch the first layers if you still get the warping effect increase the bed temp and first layer/nozzle temperature with approximately 5-10°C or use 3D-printing glue.
Obstacles:
Obstacles are designed to be fitted in the slots carved out along the fences.
Assembly:
Glue assembled parts if needed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (36)