Modular Filament Storage - With Benchy Snap on
Print Profile(43)
Description
The Ultimate Modular Filament Storage - With a Benchy Snap on, Fully Printable!
Make your own filament storage how you want it!
The Different Parts are:
Rods:
- Small Bar 14cm
- Vertical Bar 22cm
- Long Bar 29cm with X marks (For the benchy snap on)
- A 25cm Long Bar. An smaller alternative to the 29cm Bar.
- A 32.5cm Long Bar. Also an alternative to the 29cm Bar.
Connections:
- 3-Way Corner Connection
- 3-Way Straight Connection
- 4-Way Corner Connection
- 4-Way Straight Connection
- 5-Way Connection
- 6-Way Connection
- And of course the Benchy snap-on.
The Rods are 25mm in diameter.
This set up costs you about 85 Grams of filament per spool which is a very reasonable price for a fully printable spool rack in my opinion!
26 spools rack is 2.25kg.
Size: 54cm in height, 75cm in width and 21cm in depth(Spools on top not counted).
About 85g per spool
18 Spools rack is 1.2Kg.
About 66g per spool
8 Spools rack is 750g.
About 93g per spool
If you encounter difficulties printing the connections, I’ve included some easier-to-print profiles at the end of the print profile list.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)