Galactei

Paracord/Rope

cover

IMG_9714.jpeg

IMG_9716.jpeg

IMG_9715.jpeg

IMG_9717.jpeg

IMG_9710.jpeg

plate_1.png

JaredIsCoding

2024-10-31_8397ce53d9cd28.webp

Screenshot_4.png

Screenshot_3.png

This is just a prepared version of the author&#39;s original models, as-is for both of them:<ul><li>0.4mm nozzle</li><li>0.2mm layer height</li></ul>For the pinch block:<ul><li>40% cubic infill</li><li>4 walls</li><li>Organic supports</li></ul>For the roller:<ul><li>50% cubic infill</li><li>3 walls</li><li>No supports</li></ul>

Original Training Blocks - 0.4mm Nozzle

Screenshot_1.png

Screenshot_2.png

This is a modified version of the author&#39;s model that widens the rope holes to 12mm diameter, chamfers the corners, and allows for printing at an angle for both speed and strength.<ul><li>0.4mm nozzle</li><li>0.2mm layer height</li><li>40% cubic infill</li><li>4 walls</li><li>No supports needed</li><li>A small brim may help with bed adhesion</li></ul>

Solid Block with 12mm Holes - Angled Print

Tested up to 35lbs (heavy for one hand) with zero issues.All you need is some paracord and your good to go.Put whatever weight you&#39;re comfortable with and start training.Printing with fuzzy skin or sanding will help with slippery-ness. Dimensions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000746374/design/2024-10-31_6e2ed46fb2846.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000746374/design/2024-10-31_8bbb8adcdead7.png"></figure>

Grip Strength Trainers

ASIA

Print Profile(2)

Bill of Materials

Description

Comment & Rating (6)

License

Related Models