Creality Space Pi PTFE Adapter/Stopper

Search models, users, collections, and posts

lukas_r

3D Printer>3D Printer Accessories

IP Report

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

P2S

0.16mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

4.9(243)

0.2mm layer, 2 walls, 15% infill, 4mm brim

Designer

18 min

1 plate

4.7(7)

0.2mm layer, 6 walls, 25% infill

18 min

1 plate

5.0(20)

0.16mm layer, 2 walls, 15% infill

22 min

1 plate

4.8(6)

Open in Bambu Studio

Boost

760

1874

314

169

3 k

2 k

Released

Bill of Materials

Bambu Filaments

Select all

PETG HF

Description

This adapter prevents the PTFE tube from slipping into the filament dryer.

It also has a chamfer that helps with feeding filament through the opening.

I used PETG and it already held up dozens of hours of drying filament at 65°C.

Any other filament with higher heat resistance would also work. PLA is not recommended.

how to assemble:

remove the rubber plug from the dryer (it is recommended to push from the inside rather than pulling from the outside)
insert the rubber plug into the printed adapter
put adapter into the dryer and secure it by sliding on the locking ring on the inside

filament dryer accessories

creality space pi

creality space pi accessory

PTFE adapter

ptfe adaptor

Comment & Rating (314)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.