Sports chain, Chain Links
Print Profile(2)
Description
Boost Me (for free)
Boosting is free if you enjoyed my print or model help a creator out with a big thanks and a boost!!! Thank you soo much for your support!!
UPDATE 7/7/25-
New STL uploaded one side is a little flatter then the other this side goes down on the build plate, Should fix adhesion issues, I also will upload a new print profile thats 15 links at a time of this new style no brim required!! Thank you for all the boost & comments to help with the adjustments! 12% infill is all thats needed, you can bump it up if you want but so far I haven't seen an issues, slowing down the first layer also helps with adhesion issues.
Sport chain links, I had multiple people ask me about the link I use for my chains well here they are!! Put them up as a separate link to download, the links go together at a 90 degree angle and then don't come apart very easily. I designed it to lock together tightly and lesson the chance of them coming apart!
*****As of 7/7/25 model doesn't need drop down -.2 layer height****
Printing slower does help because the first layer is the most important on these once you pull the link into your slicer drop it down -.2 will almost make it perfect, also the outside is very rounded so helps going slower. I have also had more luck using adaptive layers in cura not sure what it is in bambu labs, 15% infill should be perfect on these bump it up in Silk PLA to prevent cracking when assembling.
Added Assembly GIF 10/6/2025
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (257)