De'Longhi Magnifica Evo Bean Container Extension
Print Profile(9)
Description
This is an extension for the bean container for the Delonghi Magnifica Evo (ECAM290.81.TB) coffee machine.
There are four variants:
5 cm high with or without a viewing window.
or
10 cm high with or without a viewing window.
Approximately one kilogram of coffee beans can fit into the 10 cm high extension.
The compartment for ground coffee remains fully functional.
I printed the extension from PLA and the interface layers from PETG to make the support structure easy to remove.
There is a very interesting video on YouTube about this: https://www.youtube.com/watch?v=Matf1Mna2zI
The viewing window must be cut from a piece of transparent Plexiglas or printed from transparent filament and secured with a few drops of superglue.
There is a print profile for the viewing window, which may need to be adjusted to the filament used.
I attached the extension to the machine with three cable ties to prevent accidental tipping.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (86)