Search models, users, collections, and posts
Demon Slayer Hueforge
IP Report
Print Profile(2)
0.08mm layer, 2 walls, 100% infill
Designer
7.8 h
1 plate
PETG-HF, 0.08mm layer, 2 walls, 100% infill
7.1 h
1 plate
Open in Bambu Studio
Boost
408
885
59
72
465
265
Released
Description
Boost Me (for free)
Project: Demon Slayer.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 199.72x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Jade White
Border Only Colors from here until the end.
At layer #19 (1.6mm) swap to Red for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (59)