CardCounter for MTG cards and tokens, no AMS!

Sleeve/frame for MtG cards and tokens with TWO 0-99 counters. Use them for keeping count of… anything really. Changing power and toughness, number of tokens, attacking or defending, planeswalker loyalty… Whatever you might need it for.  Or use it for whatever other game that might benefit from it.

Sized for Dragon Shield sleeves but anything smaller will also fit, even sleeveless. (I'll release a smaller version if there's demand)

Small version of the counters without the frame available HERE

Original print profile has been tuned for good results but stl is also available.

If you have a 0.2mm nozzle use it to print the number wheels, you get more detail!

Assembly: 

1. Number dials are different sizes and each has their own place and orientation (picture). Insert them on the plates.

   

2. Take the top “frame” plate with its rings and place it over the Base plate. (If your print is loose and the dials try to fall off, it's easiest to hold with two hands and support them with your index fingers beneath from the sides. You can bend the structure a little. This shouldn't usually be necessary and dials should stay in.) 
3. Press together all the connections, bottom and sides will click. 
4. Make sure that the dials are seated and turn properly before the next step.
5. Insert the three pins, locking everything together. (If the pins come out wrong size from your printer you  can scale them in X and Y axis to tune the fit.)

Please leave feedback so I can make adjustments if necessary.