Calipocket V2 3-in-1 Wallet Caliper mm/inch
Print Profile(2)
Description
A compact caliper for your wallet.
Dimensions: 85mm x 52 mm x 4mm
Available in inches and millimeters
Measurements are accurate to 1 millimeter.
Printing: Maintain layer height and ironing to ensure tolerances are met.
Boost Me (for free)
If you want to support me, feel free to boost :)
Assembly:
1.When assembling for the first time, slide together without the depth gauge, it may be tight at first.
if it is too tight, simply sand down the red edges slightly.
After a few movements, everything should run smoothly with minimal tolerance.
2. Disassemble the caliper again
3. Press the depth gauge from the inside into the square
If there are any slight stringing threads during printing, make the square free
4. Slide everything back together
5. Done :)
Printing: Maintain layer height and ironing to ensure tolerances are met.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (60)