Husky Hueforge
Print Profile(1)
Description
Print with 100% infill, a layer height of 0.08mm with a base layer of 0.16mm.
Printing parameters:
Bambu PLA Matte Black Transmission Distance: 0.3
Bambulab PLA Basic Magenta Transmission Distance: 1
Bambulab PLA Basic Blue-Grey Transmission Distance: 4
BambuLab PLA Matte White Transmission Distance: 5
Instructions for swapping:
Begin with Black
At layer #7 swap to Magenta
At layer #8 swap to Blue-Grey
At layer #12 swap to White for the remainder.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Minimum Depth of 0.48mm
The Maximum Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
Bambu PLA Matte Black Transmission Distance: 0.3
Bambulab PLA Basic Magenta Transmission Distance: 1
Bambulab PLA Basic Blue-Grey Transmission Distance: 4
BambuLab PLA Matte White Transmission Distance: 5
This print utilizes four unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Magenta
At layer #8 (0.72mm) swap to Blue-Grey
At layer #12 (1.04mm) swap to White for the remainder.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)