Search models, users, collections, and posts
Snowman Christmas Village
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.5 h
1 plate
Open in Bambu Studio
Boost
366
884
57
39
729
253
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x142.86mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.1mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to White for the rest.
AMS is not required
Boost Me (for free)
Boosts are appreciated! Thanks for the support.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (57)