Carabiner Snap Hook: circle profile,print in place - Free 3D Print Model

Search models, users, collections, and posts

Gargamade

Tools>Other Tools

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

29 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Boost Me (for free)

Every Boost boosts my mood. :-) And it encourages me to keep designing.

Fully parametric snap hook.

Recommended parameter values:

LENGTH should be double the width or at minimum width+4*thickness
practical WIDTH is at least 5*thickness, a bit lower values are possible, but impractical
smallest THICKNESS that I was able to successfully print was 3mm, but 5mm and more is recommended
GAP should be around the same as your print line width (usually 0.4mm), but 0.36 worked the best

PLA is too rigid for this print - PET-G is strongly recommended.

This is a weaker and harder to print version of the octagonal profile snap hook (here: https://makerworld.com/en/models/771536 ). This version has a circular profile leading to poor bed adhesion and other printing issues.

DISCLAIMER: The snap rings are quite strong but under no circumstances they should be used for climbing activities, securing people or anything valuable. It's still only a plastic print.

Check my other practical/functional models here: https://makerworld.com/en/@Gargamade

Do you like any of my models but need it modified? Send me a message.

Browse my other practical models here, sorted into collections:
https://makerworld.com/en/@Gargamade/collections

Do you need my models modified? Write a comment or send me a message.

Boost Me (for free)

Thank you for actually reading the whole description (or at least scrolling through it). Would you be so kind and give me a boost? Every Boost boosts my mood. :-) And it encourages me to keep designing.

Comment & Rating (2)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.