Search models, users, collections, and posts
Oni Mask with temple HUEFORGE
IP Report
Print Profile(1)
0.04mm layer, 1 walls, 100% infill
Designer
8.9 h
1 plate
Open in Bambu Studio
Boost
37
80
5
2
25
18
Released
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 162.97x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Hatchbox White Transmission Distance: 10
PLA INLAND WHITE Transmission Distance: 2.3
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #28 (1.24mm) swap to White
At layer #40 (1.72mm) swap to WHITE for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (5)