Tilt-lift table with fractal vice(100% 3D printed)
Print Profile(2)
Description
Have you ever wanted a phone case with no compromises?
Check out my new Custom Phone Case Generator: CaseStudio
Boost Me (for free)
Do you like my model? A boost is completely free for you, and you really help me a lot to create more models like this in the future. Thank you very much
The height of the lift table can be adjusted with the lower wheel, the angle with the middle wheel and the Fractal Vise can be tightened with the upper wheel.
Print Settings & Quantity:
I printed everything with a layer height of 0.2mm. All parts are correctly rotated.
| Part Name | Quantity | Support |
| #bottom_main | 1 | Yes, if the printer does not manage 8cm bridging |
| #middle_main | 1 | Yes, if the printer does not manage 8cm bridging |
| #top_main | 1 | No |
| #screw_1 | 2 | No |
| #screw_2 | 4 | No |
| #screw_3 | 1 | No |
| #screw_4 | 2 | No |
| #screw_5 | 2 | No |
| #screw_6 | 2 | No |
| #bottom_thread | 1 | No |
| #middle_thread | 1 | No |
| #top_thread | 1 | No |
| #wheel_1 | 2 | No |
| #wheel_2 | 1 | No |
| #bottom_slider | 1 | No |
| #middle_slider | 1 | No |
| #connection_1 | 2 | No |
| #connection_2 | 2 | No |
| #connection_3 | 2 | No |
| #pin_1 | 2 | No |
| #pin_2 | 2 | No |
| #knobs | 2 | No |
| #fractal_fixed | 1 | No |
| #fractal_movable | 1 | No |
| #fractal_move_fixed | 1 | No |
| #arm_connector | 30± | No |
| #clamp | 2 | Yes, Tree/Organic Support |
| #fractal_small | 8 | No |
| #fractal_medium | 4 | Yes, Tree/Organic Support |
| #fractal_big | 2 | Yes, Tree/Organic Support |
Issues:
The wheel does not hold on to the thread:
If it doesn't stick well enough, you can glue the wheel to the thread or screw it on with an M3 screw. (It has a prefabricated hole for M3 screws max. 25mm)
The arm_connectors are too tight:
It has a file arm_connector_loose, you can print this instead of the normal arm_connectors.
Building Instruction:
Done, I hope you like the lifting table.
Membership
If you like my work and would like to support me or sell my models, you can subscribe to a membership here.
License
Comment & Rating (79)