Accessories for Drill Press Dremel Workstation 220

My Dremel Workstation 220 came with a bolt too short, and was missing some element to fix the nut properly so it doesn't move when you tighten the bolt so the drill press is assembled properly.

I replaced the provided M10x16 bolt by a M10x30 (the only one M10 I could find at the only local shop opened during the bank holiday nearby).

I designed a part to put the nut in before inserting in the place, so it doesn't move. I also designed something so I can hand tight the bolt so the pilar doesn't move (I made this in two part one in each you insert the bolt and a cap, if not tight enough, just put instant glue in order to fix the cap, but it worked perfectly without this in my case). This is now perfect and the drill press is usable.

While this has been designed with a M10x30 bolt, it would work as well with shorter M10x25 or M10x20 bolts.