Hermida

cover

P1030766.JPG

P1030761.JPG

P1030763.JPG

Main Body, Print the other plate first!

plate_1.png

Removable supports and spring

plate_2.png

2024-11-11_b961838f7655c.jpg

Printing Instructions:<ol><li>First Plate:<ul><li>Print the plate that contains the supports. Make sure to use the appropriate settings for PETG materials to achieve the best quality and strength.</li></ul></li><li>Second Plate:<ul><li>This plate includes 2 programmed pauses during printing:<ul><li>First Pause: When the printer stops for the first time, place the round removable support in its designated position.</li><li>Second Pause: At the second pause, place the two removable supports as shown in the attached photo. Ensure they are correctly aligned before resuming the print.</li></ul></li><li>After each pause and the placement of the supports, resume printing to continue the process until completion.</li></ul></li></ol>Note: The removable supports are designed to facilitate assembly and eliminate the need to remove printed supports. Following these instructions will ensure correct and efficient assembly of the feeder.

Removable PETG supports. It has 2 pauses. Pay attention!

https://github.com/mgineer85/0816-feeder-mechanics

This 3D model is an 0816 feeder designed for pick and place machines, featuring a tape take-up unit that utilizes a low-profile worm gear. The compact design allows multiple feeders to be placed in parallel with minimal spacing between them. Based on the original work of mgrl, this feeder includes removable PETG supports to simplify assembly and eliminate the hassle of removing printed supports. It also features a dedicated space for the motor cables that operate the tape take-up mechanism, ensuring a clean and efficient setup.&nbsp;Based on MGRL&#39;s work:https://docs.mgrl.de/maschine:pickandplace:feeder:0816feeder:mechanics

0816 Low-Profile Worm Gear Feeder (pick and place)

ASIA

Print Profile(1)

Bill of Materials

Description

Comment & Rating (1)

This remix is based on

License

Related Models