Bear on the Mountain
Print Profile(1)
Description
Bear looking out over the world on a mountain.
It was printed with Bambu PLA Matte White, Bambu PLA Matte Black, Bambu PLA Basic Orange and Bambu PLA Basic Blue-Grey.
The Matte somehow makes it even better.
The dimensions are 114.55x210mm. When changing the size, do not change the layer quantity with it. So with e.g. Bambu Studio uncheck the box at "uniform scaling". Don't forget to set your slicers correctly.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
The Model is 114.55x210mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.9mm and the Actual Depth is 2.9mm
Filaments Used:
PLA BambuLab Black Matte Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab White Matte Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Orange
At layer #21 (1.76mm) swap to White
At layer #24 (2mm) swap to Blue Gray
At layer #26 (2.16mm) swap to White
At layer #29 (2.4mm) swap to Orange
At layer #30 (2.48mm) swap to White for the rest.
I wish you a lot of fun with this project.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)