Jack Skellington and The Grinch

----------------------------

My designs for free download on Makerworld are intended for PERSONAL printing use only. If you wish to sell prints of my designs, please obtain a commercial license to compensate me for my time and skills in creating these files. A commercial license to sell my Makerworld AND exclusive designs on Patreon can be found at https://www.patreon.com/busykikibee

----------------------------

Jack Skellington and the Grinch are ready to stir up some trouble! Get ready to be #HolidayHiJacked and celebrate #BrosBeforeHoHoHos !

Continuing with my Polaroid Pals series of duos (check out my polaroid of Snoop Dog and Martha Stewart here), I'm uploading a cheeky little print of our two Christmas castaways taking a picture together. If the polaroid print isn't your thing, I'm also uploading just the two of them without the polaroid frame. I'm also uploading a 150x150mm version for you A1 Mini printers out there (of both styles).

This print makes use of the new BambuLab Basic Bright Green filament and it's a MUST for this print. And when it comes off the printer, do yourself a favor and hold the print up to the light – you're going to love the red that glows through the print. This might be my favourite print yet! It's so much fun on many levels :)

Print for personal use only. If you wish to sell this print, head over to my Patreon for a commercial license:

----------------------------

A Commercial license to sell printed copies is available on my Patreon:

https://www.patreon.com/busykikibee

As part of your membership you will also have access to exclusive files available only on Patreon.

----------------------------

Pictured frame and/or stand can be found over @CanadianGamer

https://makerworld.com/@CanadianGamer/collections/1027330

Project: Grinch and Jack Skellington
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

This print uses 5 unique filaments:
PLA BambuLab Basic Red (a MUST to achieve the red glow effect)
PLA BambuLab Basic Black
PLA BambuLab Basic Bright Green (a MUST to achieve the same color)
PLA BambuLab Matte Gray (or Ash Gray)
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Red
At 0.8mm swap to Black
At 1.2mm swap to Bright Green
At 1.52mm swap to Gray
At 1.68mm swap to Ivory White for the rest.

All photos you see are of the actual print. Using the same filament choices will give the same result. 3mf file is AMS ready to slice and print with height range modifier and layers prepared for you. If using the STL to print the file, apply color swaps by their mm height and use height modifications and infill instructions as per the directions provided. You can safely ignore any error message about floating regions. You do NOT need a prime tower if you are printing with the STL file. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Pictured frame, stand, or puzzle box are by @CanadianGamer and can be found in his Frames and Functional items here: https://makerworld.com/@CanadianGamer/collections/1027330