Hotend Box for A1 Series 2/3/4 hotends

Print Profiles: You only need half of the amount of the white filament and 75% of the time that is shown here, because each print profile contains two build plates you can choose from, one for embedded magnets (6.1 mm holes) you insert at a pause in during printing and another one for “open” magnets (6 mm holes) that you can press fit after the print is done.

This is a Box to store your A1 series hotends in, so they are protected and don´t get lost when not in use.

I uploaded versions for 2, 3, or 4 hotends. I printed mine with a little trick and used a 0.2 mm nozzle for the letters and then switched to a 0.4 mm nozzle for the rest of the lid (the lid alone with standard 0.2 mm nozzle print profile would take 10 hours). The stl file fot the small logo and text is included but I recommend the big logo which is campatible with the 0.4 mm nozzle.

Let me know in the comments if you need another size of the box or in case of any other questions.

This model contains the BambuLab logo for decorative purposes but is not an official model of any kind.