Search models, users, collections, and posts
Magnetic Helical Gear Fidget
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% gyroid infill
Designer
50 min
1 plate
0.2mm layer, 2 walls, 15% infill - P1/X1/H2D Profile
Designer
45 min
1 plate
Open in Bambu Studio
Boost
10
23
4
0
13
8
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
Designed this gear fidget, using gears from the STLGears generator. It uses 6x3mm magnets to hold everything together. Designed with two options. Can use 4x magnets for the gears to just spin together. Or you can use 14x magnets for a clicking fidget. See photos for magnet placement options. Make sure magnet poles are all aligned the same way. Depending on your filament/printer, you may need a drop of glue to hold the magnets in place. Profile is set to print by object, can print each part a different color, or all the same.
Feedback and boosts are always welcome, thank you!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (4)