A1 Camera & Go Pro Mount

This mod not only houses the original camera fitted to the A1 but also repositions it to the front corner for an enhanced viewing angle.

If removing the A1’s camera seems a bit technical or you simply want higher quality Resolution then don’t worry we’ve got that covered, as we have designed it to fit the Go Pro and other action cameras out there.

Not only that, but we have designed a dual mount should you want to mount the A1’s camera to the top and a Go Pro to the bottom for multiple camera angles.

Fitting is easy, just disconnect the camera and unthread the existing wire, please follow bambulab wiki for precise removal.

A versatile mount designed to capture the best viewing angle of your printing process. The beauty of this mod is that it requires no additional hardware (everything is included including thumbscrews and nuts) – just print out and easily fit it to your Bambu Lab A1. The Fascia seamlessly clips over your printer's touch screen, providing a user-friendly and practical solution.

Not only have we designed it to be used with go pro attachments but we have included 3 different sized arms allowing you to customize and swap according to your specific project requirements.

Arranged on 4 different plates, simply print the plate according to you configuration.

Plate 1 - A1 Camera Mount

Plate 2 - Action Camera (Go Pro) Mount)

Plate 3 - Dual Mount (A1 and Go Pro)

Plate 4 - Thumbscrew & Nuts

Licence

If you’re planning to sell prints of my models, make sure you join one of my Commercial License membership tiers here on MakerWorld. That way you’re covered, supporting my work properly, and helping me keep the new designs coming.

Appreciate every single download, print, like and Boost — you lot are legends.

If you like this model, feel free to send a Boost — every single one genuinely pushes me to spend more time designing and releasing more cool stuff like this.