Filament Swatches with Overhang and Bridge Test, Layer Visualization, Thickness Demonstration
Print Profile(1)
Description
Filament Swatches (Try to avoid changing print settings as it may result in printing failure, use Arachne for the wall generator)
There are displays with single layer 0.2, double layer 0.4, triple layer 0.6, quadruple layer 0.8, and quintuple layer 1.0 thickness
The lower left triangle is for overhang display
The upper right triangle is for layer pattern display, with angles of 45 degrees, 30 degrees, and 15 degrees respectively
Circular display
The label area on the right is 50×30 in size
If you don't have a label printer and it's inconvenient to print labels, the reserved area is also convenient for directly editing the color card information text using Bambu Slicer software and printing directly.
If you don't need color card information, you can also directly cut it off in the slicing software.
After printing, be careful when taking out the model, as there are thin layers of 0.2 thickness, do not use brute force to take out the parts, it is easy to damage them!
Please wait for the heat bed to cool completely before carefully removing it!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)