Search models, users, collections, and posts
Base for painting clips that fit 4mm alligator clips
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
5.3 h
2 plates
Open in Bambu Studio
Boost
42
114
10
16
145
57
Released
Bill of Materials
List other parts
- x 1:
Description
Content has been automatically translated.
This clamping tool is designed for purposes such as model painting, and in its default size, it is suitable for rods with a diameter of 4mm or less.
Printing with PLA is not recommended, especially if you plan to paint with non-water-based paints, as the solvents may dissolve the PLA.
You will need to purchase an alligator clip separately. A recommended size is 5cm in length with a 4mm interface.
If you are not interested in purchasing a 4mm diameter rod, a model of a 4mm rod is also included in the file (15cm long, which can be scaled in the length direction as needed).
Use caution when scaling the model. When adjusting the size, it is necessary to adjust the density of the mesh infill.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (10)