Victoria Frances Cat Cemetery

Project: vicgato.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x161.25mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Overture Chocolate Transmission Distance: 0.2
PLA BambuLab Tough Vermilion Red Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Chocolate
At layer #17 (1.44mm) swap to Vermilion Red
At layer #19 (1.6mm) swap to Beige
At layer #32 (2.64mm) swap to Ivory White for the rest.

en el modelo se uso un blanco hueso , con un blanco mas puro y un beige mas oscuro habrá mejor contraste