Search models, users, collections, and posts
Mini-DMC DeLorean: Print-In-Place
IP Report
Print Profile(2)
![[DeLorean] Brim: 0.16mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US4698f068a4c5b6/440542992/instance/2023-11-30_771256db15388.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[DeLorean] Brim: 0.16mm layer, 2 walls, 15% infill
48 min
1 plate
0.2mm layer, 2 walls, 10% infill
37 min
1 plate
Open in Bambu Studio
Boost
208
392
78
36
1 k
754
Released
Description
Mini-DMC DeLorean: Print-In-Place
- Based on the real-life DeLorean vehicle (scaling is not accurate!)
- Print-In-Place 3D model (wheel rims should be flat on the bed)
- Leave the model in the default orientation.
- Printed with a .4mm nozzle, 15% infill with a layer height of .15mm on an Ender 3
Please let me know if anything needs adjustments, or would like to see something improved!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (78)