Gold Pharoah - King Tut
Print Profile(3)
Description
Gold Pharoah
AMS Ready - Color changes can be manually swapped.
Note: If you do not have GOLD, use the yellow profile as the color change layer is different due to the low Transmission Distance of Gold versus the high Transmission Distance of Yellow.
Scale up or down on X/Y axis only. DO NOT adjust Z height!
If you get “floating regions” warning, that can safely be ignored and does not required supports.
For Gold:
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 4
PLA Generic Gold Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to BambuLab Green
At layer #12 (1.04mm) swap to Gold
At layer #20 (1.52mm) swap to Jade White for the rest.
For Yellow:
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to BambuLab Green
At layer #11 (0.96mm) swap to Yellow
At layer #20 (1.68mm) swap to Jade White for the rest.
Any questions or requests, please ask!
Hueforge Easle by @3Dingo
Please leave a review!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (30)