Print Profile(1)
Description
A slightly different Santa Claus or Santa Claus as a Lightbox.
Print the inlay with a 0.2mm nozzle, a 0.4mm nozzle will not produce good results. You can print the backplate, the cover and the base with a 0.4mm nozzle (this saves a lot of printing time). You will find the print profile for the backplate and the cover when you download the STL files. Unfortunately, you cannot upload two different print profiles to Bambu Studio for direct download.
You can print the lightbox without a base and hang it on a wall using the holes in the back, or you can print it with the base and place it on a table or shelf.
I used a 1m long LED with battery compartment from Aliexpress for the LED. You can get these almost anywhere for very little money - they are also available with a timer function.
It is best to print the backplate with a white layer so that the light of the LED is reflected well.
Feel free to check out my other Christmas designs - more are coming in the next few days:
https://makerworld.com/en/models/82447#profileId-87878
https://makerworld.com/en/models/64964#profileId-68311
Many thanks for the template for my design goes to:
inksyndromeartwork on freepik.com (On Freepik.com there are many templates that you can use for free if you register there.)
I wish you all a Merry Christmas!!! Ho-ho-ho….
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)