Bambu P1S X1C 12mm Ultra-Thin Riser
Print Profile(1)
Description
This riser is suitable for Bambu P1 and X1 series models!!!
Ultra-thin 12mm top cover glass riser (without reserved lamp strip position, without heat dissipation holes)
It is recommended to print vertically (the idle speed should not exceed 100 as much as possible, otherwise there is a risk of collapse)
Tight-fitting with side holes and pins, no need for glue, retaining the original clean feeling!!!
Solved the problem of difficult to find ultra-thin risers, perfectly solves the problem of PTFE tube rubbing against the top cover glass and dropping powder, and there is no need to install a nozzle and filament tube guide.
Model printing time: 10 hours
Material used: 200g
Wall thickness: 2.5
It is recommended to print with these parameters to ensure model completion!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)