Digimon (HueForge)
Print Profile(1)
Description
Project: Digimon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x127.52mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Ivory White for the rest.
Remember if you sant to scale, do it only with x and y axis, z must be the same as original.
Boost Me (for free)
Boost Me (for free)
Dir gefällt mein Modell?
Dann würd ich mich über eine Unterstützung mit einem kostenlosen Boost-Token sehr freuen. Vielen Dank
Do you like my model?
Then I would be very happy if you supported me with a free boost token. Thank you very much
License
Comment & Rating (4)