Tooth Fairy Tooth Container - Keep it Safe - Free 3D Print Model

Search models, users, collections, and posts

CryoSlang

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Tuned Bridging for Hinge

Designer

34 min

1 plate

4.6(282)

Open in Bambu Studio

Boost

1988

4918

318

5.3 k

4.1 k

Released

Description

If you don't use my print profile it will probably fail. Don't complain if this happens

Some models require specific settings to work. This is one of them.

Toothy Tooth Fairy Container

Keep those precious teeth safe and easy for the Tooth Fairy to find.

This model took more iterations to get right than I would like to admit. I really wanted a realistic looking tooth container and am happy to say that it's finally done.

Tips & Info:

Prints well in PLA although PETG gives a longer lasting result.
Use my print profile!:
- Modified bridging settings to give the hinge the strength it needs
- Mouse ear brims to keep the thin walls attached to the plate
- Printable without supports but interior of the box will be a little rough (not enough to matter)
Go slow on the first closure so the hinge can get used to bending
Lid stays shut quite well and shouldn't open up accidentally

If you like this model, consider following.

Also check out my Tiktok profile - https://www.tiktok.com/@cryoslang

Boosts are always appreciated too. They really do help make it affordable to make and test models to share.

Enjoy!

Comment & Rating (318)

@TurboMcAwesome

Print Profile

Tuned Bridging for Hinge

@mrsim3d

plz name gold pla?

@user_2145895612

The gold Filament on bamboo labs Store is good enough lol

@TurboMcAwesome

Replying to @mrsim3d :

I don't really like the bamboo gold silk its too yellow. This stuff is from geeetech and it's about two thirds of the cost. in fact if you buy 10 rolls at a time, it's less than $10 per kilogram.

@Dyno420

Print Profile

Tuned Bridging for Hinge

printed easy and fast. Wife loved the idea since our stinka tooth is loose

@rog3775

Print Profile

Tuned Bridging for Hinge

easy cool print! thank you for sharing your design!

The profile uploader has replied

@CryoSlang

Thanks for leaving the first review :). I'm happy you like it

@user_1815512253

Boosted

I printed twice. I had bad adhesion first time but I’m recovering from my first clog so I’m sure it was my machine. I really wanted this for a friends granddaughter so I reprinted. How many ways can you say adorable! Beautifully detailed. Thanks for sharing your creativity. Cheers

@kingmokex86

Boosted

Print Profile

Tuned Bridging for Hinge

Printed in ABS. The hinge cracked but still suits its’ purpose.

The profile uploader has replied

@CryoSlang

Yes petg is best for its flexibility for sure. Glad it's still doing what you need it to 👍

@pedrokv

Print Profile

Tuned Bridging for Hinge

Printed out nicely. According to your recommendation, I left settings as it is, I only resized it to 200% to be able to put 2 coins inside. Thank you. (Bambulab PLA Basic, white)

The profile uploader has replied

@CryoSlang

Adorable ❤️ Did the inside bridges turn out ok when scaled up?

(Edited)

@user_655115003

we need an A1 mini profile please :)

The designer has replied

@CryoSlang

Travelling at the moment. Will try and do that when I'm back

@CryoSlang

Replying to @CryoSlang :

@user_655115003 I double checked and I already have A1 mini selected in the print profile. I see that it's not showing up though. I'm not sure why and I don't have a mini to figure out what might be different. The most important settings are: 1) Rotate bridge directions 180 degrees 2) Use mouse ear brims 3) Easier to print without supports 4) Slow down walls and overhangs 5) Arachne wall generation Basically the hinge bridge needs to go the other way and the container walls need brims to stay adhered to the print surface. Other than that, it's a thin model so slower is better.

(Edited)

@user_655115003

ok that's great, I'll give those settings a try when I get back in Jan. thanks!

@user_3976136948

Print Profile

Tuned Bridging for Hinge

10 🦷 on Bambu Lab H2s for about 4 hours! I liked it a lot, congratulations to the creator!

Show original

@Salvo

Print Profile

Tuned Bridging for Hinge

spettacolare

@user_1057950604

Print Profile

Tuned Bridging for Hinge

lid needs a bit of adjusting till it closes properly. I don’t like how the inside is stringy, would be much better if it was flat

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.