Building brick Train Track Switch left/right Small

Compatible building brick Train Switch, compatible with original (Denmark) building brick

Designe idea from original building brick part (60238)

Printed from PLA, Support needed. (see on picture)

Now with smaller bedsize! You can print now with a Prusa MK3 / Bambulab X1/P1/A1 size printer

UPDATE:

Switch Right modifyd:

Right_Part_1_V1 → Right_Part_1_V2

Right_Part_2_V1 → Right_Part_2_V2 (Same part as the Left one)

(The track connection repaird is was a wrong mirrord there. Now is OK can be use the switch without the part_2 also)

Updated “Part_3_holder_V2_Smaller toleranz” if the part not tight enough.

Update:

I redesigned the switch part so that the train can pass through from both directions, regardless of the switch’s position.

The modell finde here