The Legend Of Zelda Hueforge - Link stained glass

Project: Zelda vitrail.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA R3D Green Fluo Transmission Distance: 3.8
PLA BambuLab Basic Red Transmission Distance: 4.1
PLA BambuLab Basic Yellow Transmission Distance: 5.5
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #13 (1.12mm) swap to Jade White
At layer #14 (1.2mm) swap to Green Fluo
At layer #16 (1.36mm) swap to Red
At layer #19 (1.6mm) swap to Yellow
At layer #22 (1.84mm) swap to Jade White

Border Only Colors from here until the end.
At layer #27 (2.24mm) swap to Blue for the rest.

Comment imprimer plus de 4 couleurs avec un seul AMS : à partir de 42 sec sur la vidéo

How to print more than 4 colours with a single AMS : from 42 sec onwards in the video