Search models, users, collections, and posts
Coffee Shop · Handmade DIY
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
2.7 h
1 plate
Open in Bambu Studio
Boost
19
27
0
0
21
7
Released
Description
Content has been automatically translated.
Coffee Shop·Handcrafted DIY
- The decals are hand-drawn and applied, the windows are cut from transparent PVC sheet and inserted into the designated window frames, and the lettering on the roof is applied with a fluorescent marker.
- The structure is divided into three parts: walls, roof, and door, printed as a single unit.
- The upper portion of the doorframe has a pre-drilled hole. When installing the door, first insert the longer end of the door pin into the hole and push it in firmly, then slide the shorter end of the pin into the pre-drilled hole at the bottom of the doorframe.
Suggested assembly order: Walls + Door, windows, and decorative decals, then + Roof (final piece)
- Once assembled, the structure remains firmly intact even with gentle shaking. Tolerances are finely tuned for easy installation and secure fit.
Note: During printing, the bed temperature should be set relatively high, 75 degrees Celsius is sufficient, to prevent warping due to premature cooling of the bottom edges.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)