Harley3D

cover

IMG_8219_e40f0c47-5b73-4567-83f1-019b0d71e498.jpeg

IMG_8213_6a55b792-7940-4f3f-97fe-ef93d8aadf7b.jpeg

IMG_8231 2_6304b58b-ab75-4b4e-a8cd-bd9a9ee6bb02.jpeg

plate_1.png

IMG_3181.webp

plate_1.webp

Quick/Strong Print Profile0.28mm Layer Height4 Walls50% InfillNo Supports

0.28mm layer, 4 walls, 50% infill

GavWok

EL Print.png

I found the original size of the Christmas light holder too small for longer outdoor lights. To fix this, I scaled up the model to fit the largest possible size on a 256mm print bed, while ensuring it still has a handle for easy use. Additionally, I reinforced the middle section of the design to support the larger size and improve durability.

Extra Large, Reinforced 

tynen

PXL_20250101_235622192.jpg

Untitled.jpg

<h3>3D Print Profile for PETG</h3><h4>Printer and Setup</h4><ul><li>Printer: Bambu Lab P1S (0.4mm nozzle)</li><li>Build Plate: Textured PEI Plate</li><li>Filament: PolyLite PETG</li></ul><h4>General Settings</h4><ul><li>Layer Height: 0.28mm (Extra Draft)</li><li>Wall Loops: 4</li><li>Wall Thickness: 1.68mm</li><li>Detect Thin Wall: Disabled</li></ul><h4>Top/Bottom Shells</h4><ul><li>Top Layers: 4 (Monotonic)<ul><li>Top Shell Thickness: 0.84mm</li></ul></li><li>Bottom Layers: 3 (Monotonic)<ul><li>Bottom Shell Thickness: 0.76mm</li></ul></li><li>Infill Pattern for Solid Layers: Rectilinear</li></ul><h4>Infill Settings</h4><ul><li>Density: 50%</li><li>Pattern: Grid</li><li>Sparse Infill Anchor Length: 400% or 400mm</li><li>Maximum Sparse Infill Anchor Length: 20mm</li></ul><h4>Precision and Advanced Features</h4><ul><li>Slice Gap Closing Radius: 0.049mm</li><li>Resolution: 0.012mm</li><li>Arc Fitting: Enabled</li><li>Elephant Foot Compensation: 0.2mm</li><li>XY Contour Compensation: 0mm</li><li>Avoid Crossing Walls: Enabled<ul><li>Max Detour Length: 0mm</li></ul></li></ul><h4>Ironing</h4><ul><li>Ironing: Disabled</li></ul><h4>Other Settings</h4><ul><li>Print First Wall First: Enabled</li><li>Bridge Flow: 100%</li><li>Smooth Speed Discontinuity Area: Enabled</li><li>Wall Generator: Classic</li></ul>

PETG 0.28mm layer, 4 walls, 50% infill

Extra Large, Reinforced + Extenders

LongThinker

Cord extensions.jpg

20260102_091410.jpg

Added some 70 mm extensions to use for wrapping garland. They fit snug enough over the tips I didn&#39;t need to glue them. Printed great in a Jayo PETG gray. Kept the .28 mm layer height. Extensions use an additional 45 g of filament.

Extra Large with 70 mm extenders

Steesh

WhatsApp Image 2026-01-19 at 18.24.10.jpeg

image_2026-01-20_193635449.png

I simply mirrored the original Larger 200mm version as I had a long length of outdoor lights to come down. &nbsp;

Double Large holder

This is the Larger 200mm Version. I also have a smaller 150mm version available here:https://makerworld.com/en/models/84192#profileId-89980&nbsp;Large (200mm): Holds lights up to 20m in lengthSmall (150mm): Holds lights up to 10m in length&nbsp;This handheld organiser/reel enables you to wind up your Christmas/fairy lights to store them and prevents them from being tangled next time you need them.&nbsp;A very quick and practical print to keep your decorations organised.

Christmas/Fairy Lights Wind Up Storage Reel/Organiser_Large (200mm)

ASIA

Print Profile(5)

Description

Comment & Rating (415)

License

Related Models