Twilight Bloom Clock

In a quiet village, an antique clock called Twilight Bloom sat in a mysterious shop, its face glowing softly as flowers bloomed and wilted with each hour. The shopkeeper, Elira, claimed it chose its owner, but no one believed her—until a curious child named Lila touched it, and the petals burst into vibrant life. From then on, the clock became Lila's quiet guardian, its glow comforting her in sadness and its melody soothing her fears.

This is DIY assembly project wall clock with slot for a nail/dry wall screw.

Filament used:

• Gold silk PLA
• Black silk PLA
• Blue silk PLA
• Black Basic PLA
   

Parts Needed: (not an affiliation link - only for parts reference).

• Quick dry Glue (to stick the petals, leaves and the clock face decoration into their slots). 
• Clock Machine 18mm shaft with hand sets of your choice: https://www.aliexpress.com/item/1005002447377020.html

• Or you can use Bambu lab clock kit mentioned below and print your own clock hands from maker world models.

  
  **Note: use 1 or 2 drops of glue on the clock front face parts, putting too much glue will overflow, do not worry little drops will be enough to hold the small pieces as far as the glue quality is good.
  the back side parts will need more than few drops but still no need to use too much, the parts are not heavy.