dan_g

cover

2024-12-04_bc6ya33nnk7o.png

20mm - Full Plate (35x)

plate_1.png

20mm - Single Test

plate_2.png

25mm - Full Plate (30x)

plate_3.png

25mm - Single Test

plate_4.png

30mm - Full Plate (25x)

plate_5.png

30mm - Single Test

plate_6.png

60mm - Full Plate (15x)

plate_7.png

60mm - Single Test

plate_8.png

medien.webp

simplehook_slicer.PNG

<ul><li>No Brim</li><li>0.28 Layerheight (With 0.4 Nozzle)</li><li>No Supports</li><li>20% Adaptive Cubic Infill for strength</li><li>4 Perimenters</li></ul>

0.28mm layer, 4 walls, 20% infill

I wanted a simple Utility Hook for my Workshop that is relative strong but easy to print and easy to fasten.printed in elegoo space grey PLA.<ul><li>No Brim</li><li>0.2 - 0.28 Layerheight (With 0.4 Nozzle)</li><li>No Supports</li><li>20-30% Infill for strength</li><li>3-4 Perimenters</li></ul>the Screwhole is designed in a non-sagging fashion, so the hook should only be printed in the flat orientation whitch is also the easiest orientation to print these hooks.

Simple Hook with various lengths

ASIA

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models