Wall Hook / Wall Hanger / Coat Rack / Double

I needed a coat rack with **different hooks** (single and **double** hooks, for clothes, coats, scarves, bag hangers, etc) I wanted it to be **robust** but also **elegant** and **discreet** All this with **few holes to make in the wall**, while keeping the possibility to **add screws** if a **heavier load** needs to be supported Ideally with an **invisible mounting**

Having found these criteria in two different models, I decided to do a remix of these models

• the fastening system and small hooks come from **HpInvent's** model (which is itself a remix)

  https://www.printables.com/model/686250-wall-hook-wall-hanger-coat-rack-different-variaton

• the double hook comes from **LaZ's** beautiful and robust creation

  https://makerworld.com/fr/models/556438#profileId-475269

For the double hooks, you can either add the small shim (fixed to the wall or not), or add a second large fixing bar

You can **fix the hooks directly to the wall** (without the plates) by sliding them onto your screws

I refined the thickness of the wall mounts compared to the original model (too thick for me) It remains very robust

The **tolerance** between the parts is intentionally **tight** to make them difficult to separate If you want the parts to slide better, you can slightly reduce the size of the fastening parts in X and Y (Hook_base_1x and Hook_base_5x)

The supports can be easily removed by prying them with a small tool (screwdriver, fine pliers, etc)