T-Rex Skeleton fixed

Icefox has done a magical job by making several corrections to the model, and I have also added the remixes of Luc1D which allows you to print the dimensions with great precision in terms of supports and has added thicker connectors to reduce the play (plate 6)

He has also included a base cut in half for those who want to make a 200% (plate 5)

• Icefox has fixed parts A and B of the tail. Part A of the tail is largely and part B is completely separated at the level of the second vertebra, making part B unprintable and part A extremely fragile if barely printable. He has added internal structures to make both parts solid.
• Icefox has merged the neck clip H into the clip H file.

• Luc1D had a problem with Icefox's Tail B part, where it would almost break at the 3rd vertebra. I reinforced this area with a large solid cylinder so that there should be no way for it to break or bend now.
• Luc1D has made it possible to print the vertical dimensions at a layer height of 0.16 mm, a 0.4 mm nozzle. All manual supports/edges are already installed, as well as the variable layer height. He made sure that the layers never exceed 0.16 mm in height so that there are no layer lines.

If you want to print it at 200%, I advise you to add 1 wall

CoolPlate with glue stick highly recommended

License:

The work of MakerBot, Icefox and Luc1D is licensed under

Creative Commons (International License 4.0)
Attribution — Noncommercial — Share Alike
Attribution — Pas d’Utilisation Commerciale — Partage dans les Mêmes Conditions

No modifications were made to their work